Need to: 
- replace end of coax cable for Ant3 
- lift up the receiver board 
- cover connectors with nitro tapes 

- Also need to update SD card database at next visit
Wifi was not connected at first. I unplugged replugged the SG and it ended up working fine.
Issues on uploading data to Motus automatically. Did reboot the SGv2 with Andrew. Did delete the data and reset fresh, reboot again. Yet, issues still running, no data uploaded. SGv2 records data nonetheless.
Receiver receives power right but does not allow proper function to Rasbery Pi. Cant connect to wifi. Button light on without flashing.
"E2F7 SG replaced (Wifi fails) with SG-1522"
No more credit on card + No GPS
Previously identified vandalised antenna cables
- Previously identified vandalised antenna cables
- Ant infestation in receiver (not sure when first identified)
Previously identified bent mast. This visit was specifically to replace the structure.
Floodgate radio antenna seems to be functional. I can access the SG via local hotspot, but there is no GPS fix and no connection to Motus.'
[From ProgressReport May26] "function assessment; cables detached from one antenna at top of mast, but battery in good condition"
Severed antenna cable (presumed act of vandalism, they looked fairly cleanly cut)
[Callum: again, best description I can give from progress report alone]
I believe this is the replacement of the structure after finding the receiver inundated on 04/06/2025 (not 100% sure if visits in between or not)
[Callum: this is my description solely from the progress report, may not be accurate]
Previously identified damaged mast.
Bent mast pole much worse, with a visible crack at the bottom of the mast where the bolt is
[Callum: The below is just my description from the photo in the progress report]
Water damage / inundation (photo shows battery box quite full of water, with corrosion on battery terminals I think)
TLDR: Complete inundation

Battery Box sideways
So many spider web inside
No power, battery voltmeter not showing anything. 

I think battery is completely ------
From Google, brown liquid likely to be leak / sulfuric acid. Didn't feel comfortable investigating any further / removing battery box lid without protective gear.

Have left both input and output disconnected
the battery box was full to the brim with the battery terminals submerged. 

[Post]: Data was present up to 3rd May, so can infer that the water damage occurred / station stopped functioning on 03/05/2025
The battery box box was maybe three quarters full of water, but no sign of battery damage.
The red solar panel anderson was disconnected.
The battery box switch was off . I reset it, and the RPI powered up - I pressed the wifi button and observed the blueLEDs as expected.
When I double pressed the button, it fl ashed to indicate wifi was on but there was no network available - I'mwondering if maybe this was due to undervoltage / low battery charge?
No lights on WiFi button, no WiFi network; therefore could not verify whether the station was functioning.
Antenna pole (not antenna itself) appears to be bent.
Receiver straps slightly loose but not at risk of movement / falling.
Wifi not working. Wifi button flashing as it should, but network not showing up. Some water in receiver box. Took down for diagnostics / repair.

Audio summary from voice note:
'The battery box has water but the battery voltage is okay. The solar panel voltage is fine, but the WiFi is not working.
The battery box was water inside but it has not reached the battery
Battery voltage 13V and solar panel 21.2V
Raspberry Pi LED is on, but WiFi button is not functioning
WiFi button internal connections look fine
WiFi button turns on with one press and the LED blinks, but the double press / WiFi functionality does not work.
Antenna 2 disconnected. Connector (antenna cable) deformed, can't attach back to receiver box.
Wifi button not turning on
GPS time issue - lots of files dated 2000, which are presumably the data from after the 27th of July.
Water inundation; Anderson connections on cable between solar panel and battery box corroded / not functioning.

[Post-processing note]: From the data downloaded on the 15th of November, I could see that there was a gap from the 14th of August (UTC) until the 29th of October. 29th October is when the cable was repaired. 

After UTC conversion, last data is actually 15th August, so the 15th of August must be when the cable failed.
Wifi network visible but couldn't connect on either phone or laptop
Antenna disconnected when I arrived
Disconnected from the inside of the box (not just the external connection)
Washer and nut had fallen off
Power was off when I pressed button - checked battery and it had reset

Also, 3rd antenna was disconnected when I arrived
Does this count as an issue? There were a bunch of ants but not causing damage…
Entire mast had fallen over; omnidirectional antenna unfortunately hit a tree and was broken.